Water-Cooled Switchmode Power Supplies

Download the datasheet by entering your information below

Dynapower offers the latest in water-cooled switchmode power supply, featuring an innovative design to provide users with an operational and installation advantage. Dyanapower’s water-cooled switchmode power supply is a flexible, easy to use rectifier with <2% AC RMS of full-scale ripple, 1% regulation over the operating range and a power factor of up to >0.99. Our high-efficiency, water-cooled switchmode power supply design offers a conversion efficiency that is greater than standard SCR type rectifiers with DC output capabilities of up to 900kW.

The water cooled design has been optimized to be as small as possible. All models are supplied with a NEMA 4X enclosure suitable for corrosive environments. Water cooled units include a touch-pad interface board allowing for advanced functions such as ramp, cycle, pulse, amp-hour counter and a program mode allowing any combination of these functions.  Numerous standard output ratings for both air and water cooled units are available in stock and readily available for shipment, with non-standard ratings and requirements designed to order.

New Rectifier Financing Programs

Dynapower is now offering low interest rectifier financing programs in partnership with Lease Corporation of America. Get the equipment you need now and pay for it over time. You can also take advantage of IRS Section 179 and deduct 100% of the cost leased or purchased equipment in the first year that the equipment is put into service, saving your business thousands of dollars on your tax bill.

Learn More


Water-Cooled Switchmode Standard Configurations

Supply Voltage: 480 VAC  ± 10%, 60 Hz, 3 Phase
Output Voltage: Up to 36V (Custom higher outputs available)
Output Current: Up to 6000A (Custom higher outputs available)
Protection Class: NEMA 4X (designed to)
Power Factor: >.99 at rated output
Efficiency.89 at rated output
Ambient Temperature: 122° F max
Cooling: Water-cooled
• Water inlet temperature: not below actual dew point, but max 97° F
• Water Pressure: 20 psi
Control Precision:  Voltage/current < ± 1%
Output Ripple:  <2% AC RMS of full scale voltage & current from 10-100% of unit rating
Voltage Regulation: 1% from 10-100% of rated output
Current Regulation: 1% from 10-100% of rated output
Duty Ratio: Designed for continuous operation at rated output
Protection: Over-current, Over-voltage, Over-temperature, Short-circuit, IGBT Failure (results in unit shutdown)

All Water-Cooled Switchmode Power Supplies come with a standard Touchpad Controller. The Touchpad Controller is a programmable controller designed to be flexible, reliable, and user-friendly. Precision digital controls and intuitive recipe storage ensure users get the exact unit output required by their processes, making it quick and easy to automate.

View Details

• Polarity Reversal
• Remote control box “basic version” with analog or digital meters and potentiometers for tank side control in
the event the switchmode is not co-located with the process tank
• RS-232 interface for control of one power supply
• Protocol compatibility with Profinet or Ethernet/IP, etc
• Touchscreen controller via Ethernet connection