BTM-250 250kW/500kWh Energy Storage System

Download BTM-250 datasheet by entering info below


INTEGRATED BEHIND THE METER 250kW/500kWh ENERGY STORAGE SYSTEM FROM DYNAPOWER AND SAMSUNG SDI

Energy Storage System

The BTM-250 — a fully integrated energy storage system —  has been optimized for behind-the-meter energy storage applications where reliability and footprint matter. This energy storage system is designed especially for behind-the-meter energy storage applications such as Demand Response/Demand Charge Reduction and Backup Power.

The energy storage system is based on Dynapower’s MPS-250 Smart Energy Storage Inverter (UL 1741 SA listed) integrated with Samsung E2 batteries.

The Integrated Dynapower Samsung Energy Storage System includes:

  • MPS-250 kW Smart Energy Storage Inverter
  • Outdoor Rated, Climate Controller Enclosure for Batteries
  • Batteries – Configurable for 2, 4, or 6-hour duration
  • All AC and DC Switchgear
  • Local Energy Storage Controller

  • Integrated AC Breaker with Shunt Trip
  • Integrated DC Disconnect
  • Integrated DC Input Fuses
  • Redundant HVAC Cooling System
  • Optional Direct Release Fire Detection and Suppression System
  • Black Start
  • All AC and DC Switchgear
  • Outdoor NEMA Rated, Climate Controlled Enclosure for Batteries

INTEGRATED SOLUTION
Dynapower’s BTM-250 integrated solution containing all required protective features, as well as an AC output breaker and DC disconnect switch to provide a fully integrated solution. This offers end users and energy storage integrators a cost advantage when compared to non-integrated systems that require additional add-on items.

DYNAMIC TRANSFER™
Dynapower’s proprietary Dynamic Transfer algorithm monitors the grid stability and upon detecting a grid disturbance, will disconnect from the grid connection and transition to stand alone mode on the load connection. The transition is seamless to the critical loads and supports full load imbalances.

E COMP: AUTONOMOUS VOLT/VAR SUPPORT
A Volt Var function that provides immediate and automatic frequency support to grid.

F COMP: AUTONOMOUS Hz/WATT SUPPORT
A Hz-Watt function that provides immediate and automatic voltage support to the grid.

Operating Temp
-13 to 122° F 
Cooling
Forced Air-Cooled Inverter, Conditioned Battery Section
Rated Max Elevation
1,000 Meters Full Power; Up to 3,000 Meters with Derating
Enclosure
UL 3R (outdoor)
Dimensions (HxWxD)
135.25” (L) x 72″ (W) x 109.5” (H)
Weight
17,000 lbs

AC Line Voltage
480 VAC 3 Phase, +10%, -12%
AC Line Frequency
60 Hz (57 – 60.5 Hz) Field Settable
Continuous AC Current
301 A RMS
Overload AC Current
320 A RMS
Continuous AC Power
250 kW
Overload AC Power
300 kW
Power Factor
0 – 1.00 Leading or Lagging
Current Harmonics
IEEE 1547 Compliant, <5% TDD
Peak Efficiency
96%

Energy Rating
527 kWh
Power Rating
250 kWh
Certifications
Ul 1973 (Tray), UL 1623 Energy

Inverter:
IEEE 1547, UL 1741 SA Listing
Batteries:
UL 1973 (Tray), UL 1623

Faults
AC Over Voltage, AC Under Voltage, AC Under Frequency, AC Over Frequency, AC Overload, Over-temperature, DC Over Voltage, DC Over Current
Standards Compliance
IEEE 1547, UL 1741 SA Listing
Safety Features
Anti-islanding with UL Compliant trip points

[/vc_column]

Download BTM-250 datasheet by entering info below