 | Digital displays of output voltage and output current. |
| Precision set-point adjust pushbuttons with digital display of reference levels. |
| Stop, Start, Reset, Manual/Auto Select, and Polarity (+/-) |
| Alpha-numeric display with backlight for status indication, setup, and special operating modes. |
| Ramp set-point adjust and run display |
|
|
| Ramp with base in Voltage or Current Mode |
| Ramp to setpoint |
|
| Cycle set-point adjust and run display |
|
|
| Selectable time base of milliseconds, seconds, minutes or hours |
| End of Cycle Alarm |
|
| Amp-Hour set-point adjust and run display |
|
|
| Totalizer with 8 digit resolution |
| End of Cycle Alarm |
|
| Pulse set-point adjust and run display |
|
|
| Pulse with base in Voltage or Current Mode |
| Selectable time base of milliseconds, seconds, minutes or hours |
|
| Program (Profile) set-point adjust and run display |
|
|
| Multi-step profiles with up to 8 steps per program |
| Selectable timebase of milliseconds, seconds, minutes or hours |
| Time resolution 000 milliseconds, 0.00 seconds, minutes or hours |
|
| Set-points and program parameters, automatically restored upon power-up |
| Operating modes may be run concurrently, allowing complex waveforms and reversing profiles. |
| Touch Pad interface may be mounted on the front door of the power supply or
on a Remote enclosure |
|
